Logo 
Search:

Assembly Language Articles

Submit Article
Home » Articles » Assembly Language » GeneralRSS Feeds

Program that will read a decimal number and print it on the next line using procedures INDEC and OUTDEC. The INDEC procedure should be able...........

Posted By: Easy Tutor     Category: Assembly Language     Views: 3096

An AL Program that will read a decimal number and print it on the next line using procedures INDEC and OUTDEC. The INDEC procedure should be able to handle the OverFlow.

Code for Program that will read a decimal number and print it on the next line using procedures INDEC and OUTDEC. The INDEC procedure should be able........... in Assembly Language

 .MODEL SMALL
 .STACK 100H

 .DATA
   PROMPT_1  DB  'Enter a Decimal number (-32767 to 32767) : $'
   PROMPT_2  DB  0DH,0AH,'The given Decimal number is : $'

 .CODE
   MAIN PROC
     MOV AX, @DATA                ; initialize DS
     MOV DS, AX

     LEA DX, PROMPT_1             ; load and display the string PROMPT_1
     MOV AH, 9
     INT 21H

     CALL INDEC                   ; call the procedure INDEC

     PUSH AX                      ; push AX onto the STACK

     LEA DX, PROMPT_2             ; load and display the string PROMPT_2
     MOV AH, 9 
     INT 21H

     POP AX                       ; pop a value from STACK into AX

     CALL OUTDEC                  ; call the procedure OUTDEC        

     MOV AH, 4CH                  ; return control to DOS
     INT 21H
   MAIN ENDP

 ;**************************************************************************;
 ;**************************************************************************;
 ;-------------------------  Procedure Definitions  ------------------------;
 ;**************************************************************************;
 ;**************************************************************************;

 ;**************************************************************************;
 ;-------------------------------  INDEC  ----------------------------------;
 ;**************************************************************************;

 INDEC PROC
   ; this procedure will read a number indecimal form    
   ; input : none
   ; output : store binary number in AX
   ; uses : MAIN

   PUSH BX                        ; push BX onto the STACK
   PUSH CX                        ; push CX onto the STACK
   PUSH DX                        ; push DX onto the STACK

   JMP @READ                      ; jump to label @READ

   @SKIP_BACKSPACE:               ; jump label
   MOV AH, 2                      ; set output function
   MOV DL, 20H                    ; set DL=' '
   INT 21H                        ; print a character

   @READ:                         ; jump label
   XOR BX, BX                     ; clear BX
   XOR CX, CX                     ; clear CX
   XOR DX, DX                     ; clear DX

   MOV AH, 1                      ; set input function
   INT 21H                        ; read a character

   CMP AL, "-"                    ; compare AL with "-"
   JE @MINUS                      ; jump to label @MINUS if AL="-"

   CMP AL, "+"                    ; compare AL with "+"
   JE @PLUS                       ; jump to label @PLUS if AL="+"

   JMP @SKIP_INPUT                ; jump to label @SKIP_INPUT

   @MINUS:                        ; jump label
   MOV CH, 1                      ; set CH=1
   INC CL                         ; set CL=CL+1
   JMP @INPUT                     ; jump to label @INPUT
   
   @PLUS:                         ; jump label
   MOV CH, 2                      ; set CH=2
   INC CL                         ; set CL=CL+1

   @INPUT:                        ; jump label
     MOV AH, 1                    ; set input function
     INT 21H                      ; read a character

     @SKIP_INPUT:                 ; jump label

     CMP AL, 0DH                  ; compare AL with CR
     JE @END_INPUT                ; jump to label @END_INPUT

     CMP AL, 8H                   ; compare AL with 8H
     JNE @NOT_BACKSPACE           ; jump to label @NOT_BACKSPACE if AL!=8

     CMP CH, 0                    ; compare CH with 0
     JNE @CHECK_REMOVE_MINUS      ; jump to label @CHECK_REMOVE_MINUS if CH!=0

     CMP CL, 0                    ; compare CL with 0
     JE @SKIP_BACKSPACE           ; jump to label @SKIP_BACKSPACE if CL=0
     JMP @MOVE_BACK               ; jump to label @MOVE_BACK

     @CHECK_REMOVE_MINUS:         ; jump label

     CMP CH, 1                    ; compare CH with 1
     JNE @CHECK_REMOVE_PLUS       ; jump to label @CHECK_REMOVE_PLUS if CH!=1

     CMP CL, 1                    ; compare CL with 1
     JE @REMOVE_PLUS_MINUS        ; jump to label @REMOVE_PLUS_MINUS if CL=1

     @CHECK_REMOVE_PLUS:          ; jump label

     CMP CL, 1                    ; compare CL with 1
     JE @REMOVE_PLUS_MINUS        ; jump to label @REMOVE_PLUS_MINUS if CL=1
     JMP @MOVE_BACK               ; jump to label @MOVE_BACK

     @REMOVE_PLUS_MINUS:          ; jump label
       MOV AH, 2                  ; set output function
       MOV DL, 20H                ; set DL=' '
       INT 21H                    ; print a character

       MOV DL, 8H                 ; set DL=8H
       INT 21H                    ; print a character

       JMP @READ                  ; jump to label @READ
                                  
     @MOVE_BACK:                  ; jump label

     MOV AX, BX                   ; set AX=BX
     MOV BX, 10                   ; set BX=10
     DIV BX                       ; set AX=AX/BX

     MOV BX, AX                   ; set BX=AX

     MOV AH, 2                    ; set output function
     MOV DL, 20H                  ; set DL=' '
     INT 21H                      ; print a character

     MOV DL, 8H                   ; set DL=8H
     INT 21H                      ; print a character

     XOR DX, DX                   ; clear DX
     DEC CL                       ; set CL=CL-1

     JMP @INPUT                   ; jump to label @INPUT

     @NOT_BACKSPACE:              ; jump label

     INC CL                       ; set CL=CL+1

     CMP AL, 30H                  ; compare AL with 0
     JL @ERROR                    ; jump to label @ERROR if AL<0

     CMP AL, 39H                  ; compare AL with 9
     JG @ERROR                    ; jump to label @ERROR if AL>9

     AND AX, 000FH                ; convert ascii to decimal code

     PUSH AX                      ; push AX onto the STACK

     MOV AX, 10                   ; set AX=10
     MUL BX                       ; set AX=AX*BX
     MOV BX, AX                   ; set BX=AX

     POP AX                       ; pop a value from STACK into AX

     ADD BX, AX                   ; set BX=AX+BX
     JS @ERROR                    ; jump to label @ERROR if SF=1
   JMP @INPUT                     ; jump to label @INPUT

   @ERROR:                        ; jump label

   MOV AH, 2                      ; set output function
   MOV DL, 7H                     ; set DL=7H
   INT 21H                        ; print a character

   XOR CH, CH                     ; clear CH

   @CLEAR:                        ; jump label
     MOV DL, 8H                   ; set DL=8H
     INT 21H                      ; print a character

     MOV DL, 20H                  ; set DL=' '
     INT 21H                      ; print a character

     MOV DL, 8H                   ; set DL=8H
     INT 21H                      ; print a character
   LOOP @CLEAR                    ; jump to label @CLEAR if CX!=0

   JMP @READ                      ; jump to label @READ

   @END_INPUT:                    ; jump label

   CMP CH, 1                      ; compare CH with 1   
   JNE @EXIT                      ; jump to label @EXIT if CH!=1
   NEG BX                         ; negate BX

   @EXIT:                         ; jump label

   MOV AX, BX                     ; set AX=BX

   POP DX                         ; pop a value from STACK into DX
   POP CX                         ; pop a value from STACK into CX
   POP BX                         ; pop a value from STACK into BX

   RET                            ; return control to the calling procedure
 INDEC ENDP
                                  
 ;**************************************************************************;
 ;--------------------------------  OUTDEC  --------------------------------;
 ;**************************************************************************;

 OUTDEC PROC
   ; this procedure will display a decimal number
   ; input : AX
   ; output : none
   ; uses : MAIN

   PUSH BX                        ; push BX onto the STACK
   PUSH CX                        ; push CX onto the STACK
   PUSH DX                        ; push DX onto the STACK

   CMP AX, 0                      ; compare AX with 0
   JGE @START                     ; jump to label @START if AX>=0

   PUSH AX                        ; push AX onto the STACK

   MOV AH, 2                      ; set output function
   MOV DL, "-"                    ; set DL='-'
   INT 21H                        ; print the character

   POP AX                         ; pop a value from STACK into AX

   NEG AX                         ; take 2's complement of AX

   @START:                        ; jump label

   XOR CX, CX                     ; clear CX
   MOV BX, 10                     ; set BX=10

   @OUTPUT:                       ; loop label
     XOR DX, DX                   ; clear DX
     DIV BX                       ; divide AX by BX
     PUSH DX                      ; push DX onto the STACK
     INC CX                       ; increment CX
     OR AX, AX                    ; take OR of Ax with AX
   JNE @OUTPUT                    ; jump to label @OUTPUT if ZF=0

   MOV AH, 2                      ; set output function

   @DISPLAY:                      ; loop label
     POP DX                       ; pop a value from STACK to DX
     OR DL, 30H                   ; convert decimal to ascii code
     INT 21H                      ; print a character
   LOOP @DISPLAY                  ; jump to label @DISPLAY if CX!=0

   POP DX                         ; pop a value from STACK into DX
   POP CX                         ; pop a value from STACK into CX
   POP BX                         ; pop a value from STACK into BX

   RET                            ; return control to the calling procedure
 OUTDEC ENDP

 ;**************************************************************************;
 ;--------------------------------------------------------------------------;
 ;**************************************************************************;

 END MAIN

 ;**************************************************************************;
 ;**************************************************************************;
 ;------------------------------  THE END  ---------------------------------;
 ;**************************************************************************;
 ;**************************************************************************;
  
Share: 



Easy Tutor
Easy Tutor author of Program that will read a decimal number and print it on the next line using procedures INDEC and OUTDEC. The INDEC procedure should be able........... is from United States. Easy Tutor says

Hello Friends,

I am Free Lance Tutor, who helped student in completing their homework.

I have 4 Years of hands on experience on helping student in completing their homework. I also guide them in doing their final year projects.

I have share many programs on this website for everyone to use freely, if you need further assistance, than please contact me on easytutor.2ya [at the rate] gmail [dot] com

I have special discount scheme for providing tutor services. I am providing tutor service to students from various contries, currently most of my students are from United States, India, Australia, Pakistan, Germany, UK and Canada.

I am also here to expand my technical network to receive more opportunity in my career, make friends to help them in resolving their technical problem, learn and share my knowledge, If you like to be my friend, Please send me friend request.

Thanks,
Happy Programming :)

 
View All Articles

Related Articles and Code:


 

Other Interesting Articles in Assembly Language:


 
Please enter your Comment

  • Comment should be atleast 30 Characters.
  • Please put code inside [Code] your code [/Code].

 
No Comment Found, Be the First to post comment!